Catálogo de Productos

CAM PIR B&W 1/3

CAM PIR B&W 1/3" SAMSU. S/PIR 12VDC

Descripción

PIR type Camera B&W Sensor PIR not included SPECIFICATION Image sensor(effective pixels) 1/3" 510H X 492V(500H X 582V) *CCIR Scan system 2:1 interline Synchronization Internal sync. Sanning frequency Horizontal Vertical15.734KHz 59.94Hz(15.625KHz 50Hz)* CCIR Resolution (TV Lines) 420TVL S/N ratio > 48dB Gamma Characteristic 0.45 Mini. Illumination (F1.2),3200 ° K 3 Lux Built-in Lens Pinhole 5.5/F3.5 Auto Electronic Iris Switchable 1/60(1/50)* to 1/100000 (linear) AGC >18dB Power Consumption About 1.2W at DC12V Input Video Signal Output Composite video signal 1Vp-p ,75 Ohm Operation Temperature -10°C to 60°C Humidity 0-95% Dimension W70 X H120XD43m/m Power protection Regulated 12vdc adapter is needed, at least 200mA Optional Audio HOWTOUSE 1.12VC Regulated power adapter 12 must be used otherwise makes the device to be damaged and unable repaired no longer. It means that DC Jack inserting into the machine, the reading of multi-meter is 12. Normally, the Output of 12VDC adapter is 17V without special indication ¨regulated¨.2.Video Outa. connect the professional CCTV monitor directly can receive better resolution. (Clearer picture)b. connect video input of television directly can also get picture.c. You can also connect camera to video input of other device3.Wire Spec It is the longest transit distance that the cable of 5C3V connecting with the monitor. Owing to the quality of wire is various, Surnet guarantee 100 meter. (Although many persons connect to 200 or 300 meter.) You can use video AMP, if you don't satisfy the quality of picture.a. RG58/u same as above mentioned but worse the specific cable of A/V in the market also can be used over 50-meter distance.4. Audio (Option)The worse quality of adaptor and cable make hamble noise.5.WarrantyOne year of free warranty from purchase date. (must work in regular condition. It can not be fixed, if CCD sensor is broken as an important optical component. Please pay attention to the taking way from falling down or shaking. The customers change the circuit or repair by themselves is not allowed.

Need Help?